Gypsum Briquetting Machine
Capacity: 10-35TPH
Briquette Size: 30-60mm or customerized
Raw Materials: Gypsum, tailings, sludge, kaolin, clay, activated carbon, coal power, iron powder, coking coal, aluminum powder, iron slag, oxide scale, carbon powder, slag, etc.
Gypsum briquetting machine is also called desulfurization gypsum briquetting machinenot only can be used to suppress gypsum, but can also be used to suppress iron powder, aluminum powder, slag, tailings, etc.
Material made by this ball press machine is energy conservation and environmental protection and convenient for transportation, which can improve the utilization rate of material and reduce the transportation cost.
Material evenly goes into the hopper of molding machine from the storage bin and by the quantitative equipment, and material evenly enters the middle of the roller through the adjusting of adjustment gate on the hopper. Twin-roller has the same rotation speed and direction. When the materials fall into the space between two rollers and bear strong extrusion from pressure, pressure changes from small to big, and the molding pressure reaches its peak in the attachment of roller center, after material passes the line, the molding pressure decreases rapidly to make material enter into the ball-dropping state and take off the ball smoothly.
