Industrial Dryer
Processing capacity: 1-2200t/h
Feeding size: 125-250mm
Processing material: barite, calcite, coal, concrete, cement, gypsum, limestone, granite, rock and so on.
Industrial dryer has many kinds, and different kinds are divided into different types. This paper mainly introduces a common industrial rotary dryer.
Industrial dryer is mainly composed of gyrorotor, lifting plate, driving device, supporting device, sealing ring and other components. Drying drum is a cylinder which is slightly tilted compared with horizon. Material is fed from the higher end, the high temperature hot wind and material flow into the cylinder, wet material entering the drying cylinder is repeatedly raised and scattered by the lifting plate on the wall of rotary drum, in the process of falling down, material is crushed into tiny particles by the crushing device and realizes the full contact with hot air and reaches the drying purpose. With the rotation of the cylinder, the material runs to the lower end due to the action of gravity.
Industrial dryer has strong adaptability of materials, and is used in the ore dressing, building materials, metallurgy, chemical industry and other industries. It is used to dry material with certain humidity or granularity, and the operation is simple and reliable, thus it is widely used.
Spec./m (Dia.×Length) | Shell Cubage (m³) | Capacity (t/h) |
Φ1.2×8.0 | 9.0 | 1.9～2.4 |
Φ1.2×10 | 11.3 | 2.4～3.0 |
Φ1.5×12 | 21.2 | 4.5～5.7 |
Φ1.5×14 | 24.7 | 5.3～6.6 |
Φ1.5×15 | 26.5 | 5.7～7.1 |
Φ1.8×12 | 30.5 | 6.5～8.1 |
Φ1.8×14 | 35.6 | 7.6～9.5 |
Φ2.2×12 | 45.6 | 9.7～12.2 |
Φ2.2×14 | 53.2 | 11.4～14.2 |
Φ2.2×16 | 60.8 | 13.0～16.2 |
Φ2.4×14 | 63.3 | 13.5～16.9 |
Φ2.4×18 | 81.4 | 17.4～21.7 |
Φ2.4×20 | 90.4 | 19.3～24.1 |
Φ2.4×22 | 99.5 | 21.2～26.5 |
Φ2.6×24 | 127.4 | 27.2～34.0 |
Φ3.0×20 | 141.3 | 30.1～37.7 |
Φ3.0×25 | 176.6 | 37.7～47.1 |
Φ3.2×25 | 201 | 42.9～53.6 |
Φ3.6×28 | 285 | 60.8～76.0 |
Technical parameters of indirect heat dryer:
| Shell diameter ×shell Length Items | Inside diameter of outer shell (mm) | Inside diameter of inner shell (mm) | Shell cubage (m³) |
| Φ1.5×15m | 1500 | 500 | 20.27 |
| Φ1.5×17m | 22.97 | ||
| Φ1.5×19m | 25.68 | ||
| Φ1.8×21m | 1800 | 650 | 35.91 |
| Φ1.8×23m | 39.33 | ||
| Φ1.8×25m | 42.75 | ||
| Φ2.2×21m | 2200 | 800 | 58.10 |
| Φ2.2×23m | 63.61 | ||
| Φ2.2×25m | 69.15 |