Slag Dryer
Production: 10-30t/h
Cylinder capacity: 9-285m³
Applied material: slag, blast furnace slag, fly ash, cinder, carbide slag, limestone, clay, sand, quartz sand.
Slag dryer is a kind of rotary dryer, and it is mainly composed of the rotary cylinder, induced wind equipment, high-speed scattering equipment, lifting plate, conveying equipment, hot wind equipment, reducer, supporting device, sealing device and other parts. Granulating slag dryer is commonly used in building materials, metallurgical, ore dressing, chemical, cement and other industries. It can also be used in drying slag, carbide slag, limestone, clay, river sand, quartz sand, water slag and other materials.
1. Slag rotary dryer can satisfy the different needs of users for the granularity and moisture of lag, fly ash and other materials after drying.
2. Slag dryer has such features as large capacity, strong overload-resistant ability and less fuel consumption, which can directly reduce the drying cost for you.
3. When designing the slag dryer, in order to reach the best drying effect, it adopts downstream drying method, and the material and the heat flow enter the drying equipment from the same side. The outlet temperature of dryer is low and its thermal efficiency is high.
4. Slag dryer for sale uses a new type of feeding and discharge device which eliminates the phenomena of feeding infarction, discontinuity, uneven grain, returning materials and so on, which reduces the load of dust removal system for you.
Spec./m (Dia.×Length) | Shell Cubage (m³) | Capacity (t/h) |
Φ1.2×8.0 | 9.0 | 1.9～2.4 |
Φ1.2×10 | 11.3 | 2.4～3.0 |
Φ1.5×12 | 21.2 | 4.5～5.7 |
Φ1.5×14 | 24.7 | 5.3～6.6 |
Φ1.5×15 | 26.5 | 5.7～7.1 |
Φ1.8×12 | 30.5 | 6.5～8.1 |
Φ1.8×14 | 35.6 | 7.6～9.5 |
Φ2.2×12 | 45.6 | 9.7～12.2 |
Φ2.2×14 | 53.2 | 11.4～14.2 |
Φ2.2×16 | 60.8 | 13.0～16.2 |
Φ2.4×14 | 63.3 | 13.5～16.9 |
Φ2.4×18 | 81.4 | 17.4～21.7 |
Φ2.4×20 | 90.4 | 19.3～24.1 |
Φ2.4×22 | 99.5 | 21.2～26.5 |
Φ2.6×24 | 127.4 | 27.2～34.0 |
Φ3.0×20 | 141.3 | 30.1～37.7 |
Φ3.0×25 | 176.6 | 37.7～47.1 |
Φ3.2×25 | 201 | 42.9～53.6 |
Φ3.6×28 | 285 | 60.8～76.0 |
Technical parameters of indirect heat dryer:
| Shell diameter ×shell Length Items | Inside diameter of outer shell (mm) | Inside diameter of inner shell (mm) | Shell cubage (m³) |
| Φ1.5×15m | 1500 | 500 | 20.27 |
| Φ1.5×17m | 22.97 | ||
| Φ1.5×19m | 25.68 | ||
| Φ1.8×21m | 1800 | 650 | 35.91 |
| Φ1.8×23m | 39.33 | ||
| Φ1.8×25m | 42.75 | ||
| Φ2.2×21m | 2200 | 800 | 58.10 |
| Φ2.2×23m | 63.61 | ||
| Φ2.2×25m | 69.15 |